зголеми...	Dynacord TGX20 Цена: €9999.00 Код на производ: TGX20 На лагер: да

TGX20 Dsp power amplifier 4 x 5000w, live 4-channel DSP amplifier for live applications Market-leading power density with up to 20kW in 2RU Fully integrated DSP with advanced 96 kHz processing and FIR Drive technology OMNEO integration for seamless compatibility with Dante and OCA Full color touch screen for control without software Specifications OUTPUT POWER Load impedance 2 Ω 2.7 Ω 4 Ω 8 Ω IMD-SMPTE, 60 Hz, 7 kHz < 0.15 % Maximum Output Power1 All channels driven 5200 W 6000 W 5000 W 2500 W Specifications Number of amplifier channels 4 Maximum Output Voltage 210 V peak Maximum Output Current 84 A peak AMPLIFIER Voltage Gain ref.1 kHz 32.0 dB, adjustable 24-40 dB Input Sensitivity ref. to Max. Output Voltage 13.7 dBu (3.73 V), adjustable 5.7-21.7 dBu THD3 dB below Max., AES17, 1 kHz < 0.05 % IMD-SMPTE, 60 Hz, 7 kHz < 0.15 % DIM100, 3.15 kHz, 15 kHz < 0.15 % Crosstalkref. 1 kHz, 12 dB below Max., 8 Ω < -80 Db Frequency Response ref. 1 kHz, analog into speaker out 20 Hz to 20 kHz (±1 dB) Damping Factor,20 Hz to 200 Hz, 8 Ω > 400 Output Stage Topology Class D, fixed frequency Signal to Noise Ratio A-weighted, analog input 115 dB A-weighted, digital input 118 dB Output Noise A-weighted, analog input < -70 dBu A-weighted, digital input < -73 dBu DIGITAL SIGNAL PROCESSING Sampling rate 48 kHz/96 kHz, OMNEO/Dante synchronized Signal Delay/Latency Analog in to Speaker Out, 48 kHz/96 kHz 0.70 ms/0.53 ms AES3 in to Speaker Out, 48 kHz/96 kHz 1.00 ms/0.66 ms Dante Network Latency typ. 1.00 ms Signal Processing 32/40 bit, floating point User EQ 12 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass & Notch; 2 filters of them with additional asymmetric filter type User Delay 0 to 2000 ms per channel (units: µs, ms, s,cm, m, inches, feet) Array EQ 5 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass, & All-Pass Array Delay 0 to 500 ms per channel (units: µs, ms, s, cm,m, inches, feet) Speaker EQ 10 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Hi-Pass, Lo-Pass, & All-Pass Speaker X-Over Hi-Pass & Lo-Pass per channel, 6/12/18/24/30/36/42/48 dB Bessel/Butterworth,12/24/48 dB Linkwitz-Riley; AlignmentDelay, 0 to 20 ms per channel Speaker FIR up to 1025 taps, Linear Phase Filter, Linear Phase Brickwall X-Over Speaker Limiters Peak Anticipation Limiter & RMS/TEMP Limiter per channel Other functions Source Selection & Mix, Level, Mute, Polarity, Sine & Noise Generator, Level Meters, Impedance Measurement, & Load Monitoring Memory DSP Presets 1 Factory + 20 User Speaker-Pool Presets 30 speaker settings Source Supervision & Fallback AES3 Lock & OMNEO/Dante network supervision,switch over to alternative Source Selection CONNECTIVITY Analog Audio Input/Thru Type 4 x 3-pin XLR female/male Maximum Input Level + 24 dBu Input Impedance, active balanced 20 kΩ Reference level equal to digital input +21 dBu for 0 dBFS Digital Audio Input/Thru Type 2 x 3-pin XLR (alternative use of Analog In/Thru) Format AES3 (AES/EBU) Input Sample Rates 32 to 192 kHz, internal Sample-Rate-Converter Thru Connector active buffered, direct bypass if device is unpowered Network Type 2 x Neutrik etherCON/RJ45, redundant PRIMARY/SECONDARY Format 1000base-T/100base-TX, integrated switch Network Audio Inputs 8 channels, 48/96 kHz, OMNEO/Dante format Network Audio Outputs(Monitor) 2 channels, 48/96 kHz, OMNEO/Dante format Front side ServicePort 1 x USB Type A Mains Input 1 x Neutrik powerCON-HC Speaker Output 4 x NL4 GENERAL User Interface Display 320 x 240 pixel, 3.5" color TFT Front panel indicators Full color LED illuminated ring Front panel operating elements Rotary encoder, Capacitive Touch Screen Rear panel indicators 2 x LED (AES3 Input mode active, Amp-Find) Rear panel operating elements Mains switch Power Requirements 100 V to 240 V, 50 Hz to 60 Hz AC Power Consumption Rated Power Consumption 2250 W 1/8 Maximum Output Power at 4Ω 2850 W Idle Mode (no input signal) 110 W Standby Mode < 19 W Power Supply Topology Switching Mode Power Supply with digital controlled Power Factor Correction Protections Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, In rush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/Under voltage Protection Cooling: Front-to-rear, temperature controlled fans, supervised Ambient Temperature Limits +5 °C to +40 °C (+40 °F to +105 °F) IEC Protection Class Class I (grounded) Electromagnetical Environment E1, E2, E3 Color Black Dimensions (W x H x D), mm 483 x 88.1 x 514.2 Weight 18.3 kg (40.4 lb) Shipping Weight 20.5 kg (45.2 lb) Amplifier at rated conditions; all channels driven, 4Ωloads, analog input, 32 dB gain, 48 kHz sample rate,unless otherwise specified.1Test signal for max. output power according IHFA-202 (Dynamic-Headroom, burst 1 kHz/20 ms on/480ms off/low level -20 dB).

Оцени го производот Супер Добро Просечно Слабо Не е добро

Copyright ©.pavlovic.com.mk Сите права заддржани | designed by AADesign

Powered by Shop-Script FREE shopping cart software